Search by Vehicle
 
 

EBC Front Brake Disc MD1008

£114.98

In stock

MD1008 Brake Disc Front by EBC

Fitment

  • Honda, CB 750, 1992, 2002
  • Honda, CBF 600, 2004, 2006
  • Honda, CBF 600, 2004, 2008
  • Honda, CBR 1000, 1988, 1999
  • Honda, NT 650 Deauville, 1998, 2005
  • Honda, NT 700 Deauville, 2006, 2013
  • Honda, ST 1100, 1996, 2002
  • Honda, VFR 750, 1988, 1993

Product Details

Outer Diameter :   296 mm
Inner Diameter :   144.2 mm
PCD :   166 mm
Number of mounting bolts :   6
Bolt hole diameter :   10.5 mm
Thickness :   5 mm
Type :   Fixed
Manufacturer :   EBC

EBC HPSR Brake disc, rigid design. MADE IN UK.

The aim of the development is to improve the braking behavior compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher friction coefficient. This steel is much more resistant to rust than cast steel. In addition, the entire surface is protected by a 3 micron thick zinc layer, which is braked in the area of ​​the brake lining contact zone when braking. It is only in this area that it is easier to form rust rust with a longer service life.

The brake discs are drilled in the bird’s-swing signal to get rid of the rainwater and brake dust with as few holes as possible while simultaneously cleaning the brake disc. The fewer drill holes are installed, the better the wet braking behavior and the lower the wear.

  • Brake ring made of forged HPSR steel with low carbon content.
  • Therefore there is no warping of the brake disc even at the highest load.
  • No glazing of the braking surface, therefore the coefficient of friction remains constant.
  • Braked surface with optimized hole pattern.
  • Galvanized to protect against corrosion.
  • Lowest manufacturing tolerances.
  • EBC recommends for best braking performance EBC Double-H sintered brake pads.
  • Stand-alone design.
gtin

5.05E+12

Brand

EBC

Manufacturer Part Number

MD1008

Type

Fixed

Intended Use

Replacement Part

Material

Stainless Steel

Inner Diameter

144.2 mm

Thickness

5 mm

Number of Bolts

6

Bolt Hole Diameter

10.5 mm

PCD

166 mm

Outer Diameter

296 mm

Make Model Year
Honda CB 750 1992 - 2002
Honda CBF 600 2004 - 2006
Honda CBF 600 2004 - 2008
Honda CBR 1000 1988 - 1999
Honda NT 650 1998 - 2005
Honda NT 700 2006 - 2013
Honda ST 1100 1996 - 2002
Honda VFR 750 1988 - 1993
Worldwide-Shipping-Icon
Worldwide Shipping Options
Same-Day-Dispatch-Icon
Same Day Dispatch Before 3PM
Easy-Exchange-Icon
Easy Exchange & Refund Policy
Trusted-Reviews-Icon
5 Star Trusted Shopper Reviews