Lithium Battery LFP01 JMT

Description

Lithium-ion Motorcycle battery LFP01 from JMT, high-tech for your motorcycle.

A Tiny Battery With a Big Punch of 120 Cold Start Cranking Amps (CCA)

Advantages

• More than 65% weight saving of normal lead-acid type batteries
• Unbeatable ratio of cost / weight saving
• Mountable in any position. Non-spilling no acid
• No pollution -contains no heavy metals
• Balanced discharge / charge of all cells by Balancer. Very low self-discharge (max. 5% per month)
• Fast charging with high charging current (up to 90% in 6 min)
• Even at high temperatures still good performance up to 60 ? C
• Perfect for track and race bikes where weight reduction is an enhancement
• Super cranking power
• Increased safety, Excellent cycle life – 2000+
• Easy charging

Features

• Spacers Battery is equipped with one or more spacers, which are taped with adhesive strip under the battery so that the battery fits exactly into the battery box.
• Waterproof The battery is completely waterproof and is not damaged when the motorcycle is washed with high pressure.
• Indicator The battery has a battery status – equipped Indicator. Simply press the test button. Lights every 3 blue LEDs on the battery fully (ful) is loaded. Lights 2 LEDs, it is charged only half (med). At the latest when only one LED (low), the battery must be charged.

By replacing a standard lead-acid battery with a JMT lithium-ion battery up to 5 kg in weight can be saved, without any appreciable effort.

Easy charging, Safe technology and high durability

Lead-acid batteries can be used only 30% of its capacity due to the specific characteristics, while nearly 100% of the capacity can be used in lithium ion batteries. For this reason, lithium version of JMT batteries for the same starting power need only 1/3 of the capacity of a comparable lead-acid battery. A steady state of charge of all cells is also ensured by a built-in processor ( “balancer”). The dimensions of lithium-ion batteries comply with the help of adapters with a size of original lead-acid batteries. The ports are the same, so the battery can be replaced without further adjustments in a few minutes.

Please note that for charging only suitable chargers should be used . Motorcycle parts store has a full range of chargers. The maximum recommended load currents, refer to the technical data below

Technical Data:

Voltage:12v
Capacity:2.0 Ah (10 Std) 24 Wh
Type:Lithium
Manufacturer claimed CCA:120 A
Length 92/88.75 mm
Width:52/48.75 mm
Height:90 mm
Manufacturer: JMT

Corresponds with KTM part number: 79011153000. Identical in construction with: HY85S