Battery YTZ5S-FP JMT Lithium replacement

Description

Lithium-ion batteries from JMT, high-tech for your motorcycle.

The latest generation of batteries can be identified by the red housing cover.

Spacer (S)

The battery is equipped with one or more spacers that are stuck under the battery with the supplied adhesive strip so that the battery fits exactly into the battery box.

Waterproof (W)

The battery is completely waterproof and will not be damaged if the motorcycle is cleaned with high pressure.

Indicator (I)

All batteries are equipped with a battery status indicator.

Just press the test button. If all 3 blue LEDs light up, the battery is fully (fully) charged. If only 2 LEDs light up, it is only half (med) charged. The battery must be charged at the latest when only one LED is lit (low).

By replacing a standard lead-acid battery with a JMT lithium-ion battery, you can save up to 5 kg in weight without any significant effort.

The following advantages speak for JMT lithium-ion batteries:

– approx. 1/3 the weight of a comparable lead-acid battery

– Unbeatable cost / weight savings ratio

– Battery housing made of nylon, therefore deformation when exposed to heat is practically impossible

– Can be installed in any position as it does not contain any acid

– does not contain heavy metals

– balanced discharge / charge of all cells by balancer

– Fast charging with high charging current possible (up to 90% in 6 min)

– very low self-discharge (max. 5% per month)

– Good performance up to 60 ° C even at high temperatures

– safe technology and long service life

Due to their specific properties, lead-acid batteries can only use 30% of their capacity,

while with lithium-ion batteries almost 100% of the capacity can be used.

For this reason, the lithium versions of the JMT batteries only require 1/3 the capacity of a comparable lead-acid battery for the same starting power.

A built-in processor (“balancer”) ensures that all cells are charged evenly.

With the help of adapters, the dimensions of the lithium-ion batteries correspond to the dimensions of the original lead-acid batteries.

The connections are also identical, which is why the battery can be replaced in a few minutes without further adjustments.

Please note that only suitable chargers may be used for charging. We recommend JMP chargers.

The maximum recommended charging currents can be found in the technical data below

Under no circumstances may chargers be used that attempt to desulphate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before they actually start charging.

The maximum charging voltage of 14.9 volts must not be exceeded under any circumstances.

The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.

technology

JMT lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium polymer process in their manufacture.

This means that they can neither go up in flames nor explode during normal operation.

The technology and the manufacturing process guarantee the highest safety standard for lithium batteries.

– 12 V maintenance-free lithium-ion battery

– Recommended charging current 1 A

– maximum charging current for fast charging 10 A.