Motorcycle Universal Throttle Cable Kit

Description

Universal throttle cable kit 1.35m Long 6mm outer with Teflon liner

The Conduit is steel covered with black PVC and the inner is Teflon and the wire is galvanized. One end of the inner wire is fitted with a carb nipple.

The opposite end will need to be cut to length and the required nipple soldered.

The ferrules and adjusters are a tight fit. You will need a basic soldering kit and basic soldering skills to solder the nipple into place.

Universal Throttle Cable Kit Includes:

• 1.35 meters (4.4 feet/4 feet 4.8 inches/52.8 inches) of 6mm OD black PVC coated, spiral wound, Teflon lined outer conduit
• 1.6 meters (5.2 feet/5 feet 3 inches/63 inches) of 1.5mm ODgalvanized steel wire (7 x 7 strand)
• 2 ferrules, 5mm OD nose
• 2 ferrules, 6.5mm OD nose
• 1 6mm x 1.00 x 32mm mid-adjuster
• 1 6mm x 1.00 x 32mm adjuster screw with nut
• 2 neoprene adjuster boots
• 1 brass carburettor nipple, 3mm DIA x 3mm (1.9mm bore)
• 1 brass barrel nipple, 5mm DIA x 7.5mm (1.9mm bore)
• 1 brass barrel nipple, 5.75mm DIA x 5.5mm (1.4mm bore)
• 1 brass barrel nipple, 6mm DIA x 4.2mm (1.7mm bore)
• 1 brass barrel nipple, 6mm DIA x 8mm (2.1mm bore)
• 1 brass barrel nipple, 6mm DIA x 10mm (2.1mm bore)

Made in the USA