The Motopressor Pocket Pump has proved to be an efficient “pocket sized” pump since 2013 up until 2023. No changes had to be made to the pump during the 10 years the Pocket Pump has been on the market and is now a worldwide success.
To continue the success of the pump, it now has a cover on it! Because technology has changed quite a lot in the last 10 years, the pump is now SMALLER (100*74*37mm) in size and half the weight of it (345g).
It still pumps over 130 psi and will inflate a 150/70 R18 tyre from 0 to 31psi in 3 minutes.
There is a built-in “checking valve” on the pump so you can attach your pressure gauge to the valve and check the tyre pressure at any time.
Comes with a 185mm inflation hose, 2m long power cord with SAE connector, alligator clips with SAE connector and a top quality zippered EVA bag.
The MotoPressor Pocket Pump is CE approved meaning it meets the requirements as set out in European Directives that cover health, safety and environmental protection legislation. We are so confident about the quality of our product that it is covered by a FIVE YEAR WARRANTY.
WARNING – Do not use this pump in a standard BMW accessory outlet, unless it is wired directly to the battery and bypasses the motorcycle’s electrical computer system, “CANbus”. The CANbus monitors and limits the amperage of the accessory outlet. When you plug the MotoPressor into a CANbus equipped accessory outlet the CANbus will automatically shut off the circuit and the MotoPressor will stop working. It is not the fault of the Motopressor.