Menu
Rocky Creek Designs strives to manufacture motorcycle accessories which appeal and are “different”, creating a “must have” for motorcyclists all over the world!
This is a great little pump. ULTRA compact, this stripped down pocket pump weighs in at only 345g and fits in the palm of your hand. Built around a custom modified 12 volt inflator. What it lacks in looks, it makes up for in performance and functionality – which is what you really need when you’re stranded in the middle of nowhere.
Our Pocket Pump has proved to be an efficient “pocket sized” pump since 2013 up until 2023. No changes had to be made to the pump during the 10 years the Pocket Pump has been on the market and we are very proud that this is now a worldwide success.
To continue the success of the pump, we decided to change it up a little, and have “finally” put a cover on it! Because technology has changed quite a lot in the last 10 years, we have also managed to make the pump SMALLER (100 x 74 x 37mm) in size and half the weight of it (345g).
It still pumps over 130 psi and will inflate a 150/70 R18 tyre from 0 to 31psi in 3 minutes!!
There is a built-in “checking valve” on the pump so you can attach your pressure gauge to the valve and check the tyre pressure at any time.
Comes with a 185mm inflation hose, 2m long power cord with SAE connector, alligator clips with SAE connector and a top quality zippered EVA bag.
Measures PSI or KPA
0-60 PSI/0-4.2 KPA read out
50mm analogue dial
300mm Braided flex hose
Push button air bleed valve
Protective rubber gauge guard
Self locking brass air chuck
usable inline with a motopressor pump
This is a great little pump. ULTRA compact, this stripped down pocket pump weighs in at only 580g and fits in the palm of your hand. Built around a custom modified 12 volt inflator.
This airpump has great performance and functionality ? which is what you really need when you?re stranded in the middle of nowhere. MotoPressor has a 62cm long inflator hose, a 2m long power cord with an SAE fitting on the end and a hands-free, screw-on delivery valve that fits all bikes. Included is a battery cable with an SAE fitting at the end for you to connect into. All this packs small into a heavy duty neoprene pouch.? MotoPressor will pump the front tyre of your motorcycle from flat to around 32 psi and the rear to around 28psi in two (2) minutes (Tests run on a BMW R1200GS). MotoPressor is capable of pumping over 100 psi!
Use the MotoPressor Pocket Pump to inflate your tyres, anywhere, anytime, OVER and Over again. The MotoPressor Pocket Pump is CE approved meeting all the requirements of European Directives that cover health, safety and environmental protection. We are so confident about the quality of our product that it is covered by a FIVE YEAR WARRANTY.
Do not use this pump in a standard BMW accessory outlet, unless it is wired directly to the battery.The pump must bypass the motorcycle?s electrical computer system (CANbus). The CANbus monitors and limits the amperage of the accessory outlet. When you plug the MotoPressor into a CANbus equipped accessory outlet the CANbus will automatically shut off the circuit and the MotoPressor will stop working. It is not the fault of the Motopressor.
| Weight | 800 g |
|---|
